Automatic Liquid fuel Heaters

These heaters are meant to burn liquid fuel and be installed in different locations where air heating is needed or where easily movable or quickly and easily installable heating is necessary.  The heaters can produce heat from not only great quality liquid fuels but also fuels of bad quality. That is achieved by equipping heaters with different burners based on the needs of a customer.

In order to be able to get heat from almost any type of liquid fuel or if low and middle quality fuels are meant to be burned, the heaters are equipped with Probus Universal oil Burners.

If the only fuel that is going to be burned will be natural gas, diesel or any other specific heating fuel, then respective burners are added (usually German marks).

The heaters can provide heat to a room from one place or be supplied with air duct system, to distribute the heat to different places directly and faster.

Fuel: Waste oil, Motor oil, Vegetable oil, Diesel; Waste oils; Hydraulic oil; Transmission oil; and their mixtures.


Available outputs (standard): up to 1 MW* 

*Not all heater outputs we offer have been shown


Find out how we can help you:


Contact now

When contacting us please provide information about the fuel type you want to use and volume of the room/-s you need to heat. Also please provide other details that might be relevant to determine the best solution for your case).



! Note: The following heater specification illustrates the characteristics and requirements of heaters when supplied with Probus Universal oil Burners. 

(Fuel: Waste oil, Motor oil, Vegetable oil, Diesel; Waste oils; Hydraulic oil; Transmission oil; and their mixtures.)

DSG - 30

Output (max): 30 kW

Electric Power supply:  220 V 50 Hz

Primary air supply:  0.2 - 0.4 bar (for fuel pulverization)

Warm air flow: 3200 m3/h

Fuel consumption (max): 2.8 kg/h

Maintenance: 1 - 2 times a month (depending on the fuel quality)

Warranty: 2 years

Heated area: 700 - 900 m3

Dimensions (width x depth x height): 51 x 88 x 175 cm

Weight: 125 kg

DSG - 80

Output (max): 80 kW

Electric Power supply:  380 V 50 Hz

Primary air supply:  0.6 - 0.8 bar (for fuel pulverization)

Warm air flow: 4000 m3/h

Fuel consumption (max): 7.1 kg/h

Maintenance: 2 - 3 times a year (depending on the fuel quality)

Warranty: 2 years

Heated area: 4000 - 5000 m3

Dimensions (width x depth x height): 54 x 90 x 190 cm

Weight: 170 kg

DSG - 50

Output (max): 50 kW

Electric Power supply:  220 V 50 Hz

Primary air supply:  0.6 - 0.8 bar (for fuel pulverization)

Warm air flow: 4000 m3/h

Fuel consumption (max): 4.3 kg/h

Maintenance: 2 - 3 times a year (depending on the fuel quality)

Warranty: 2 years

Heated area: 2000 - 3000 m3

Dimensions(width x depth x height): 740 x 1040 x 1420

Weight: 140 kg

DSG - 130 kW

Output (max): 130 kW

Electric Power supply:  380 V 50 Hz

Primary air supply:  0.6 - 0.8 bar (for fuel pulverization)

Warm air flow: 7600 m3/h

Fuel consumption (max): 11.8 kg/h

Maintenance: 2 - 3 times a year (depending on the fuel quality)

Warranty: 2 years

Heated area: 6000 - 8000 m3

Dimensions (width x depth x height): 71 x 117 x 226 cm

Weight: 380 kg 

0
Created with Mozello - the world's easiest to use website builder.

 .